Wii - SoftMod Packs and System Menu 4.1.

In this section, Your WII should already be installed Homebrew Channel and bootmii and You have made your nand backup on system menu 3.0-4.2, or here for the wii 4.3 using letterbombs exploit.

Download SoftMod Pack and System Menu Update Files.

• Requires a standard SD card, 1-2Gb, FAT32 Formatted. SDHC cards is not supported and will not work.
• Have 350 free blocks of Wii nand space..
• Remove all GC controllers, GC memory cards, and any USB devices.
• Don't lose the power - Very important..!

Download the system menu for the region of your wii. or the target region you want when your done. Be sure to download to right one. Remember, to try this at your own risk!.

*Download:
*WII SoftMod Pack. - 46Mb.
*WII System Menu 4.1.

**IOS236 Installer.

Wad Installations.
NOTE: If a wad fails to install, try to install that wad again. If the wad still fails, press B to go back to the main menu, select Reload IOS, Reload IOS236, then try to install the wad that is giving you trouble again. DO NOT PROCEED TO THE NEXT STEP UNTIL ALL WADS INSTALL.!!

• Extract all files to SD:/. Overwrite files if asked.
• Start HBC, press [HOME], then launch Bootmii.
• Multi-Mod Manager [MMM] will boot (via cboot2).

Never Uninstall IOS or SM, you will brick your wii.!

• Select "WAD Manager" - Press A.
• Press (1) to "Install all Wads" - Press A.
• 25 wads should install without error, "Press any button to continue".

Be sure all 25 wads installed without error, very important.!! Do not proceed with error..!!
WARNING: This is a version patched System Menu, running on a version patched cios60. NEVER replace cios60-v54321 with ios60-6174. Doing so will brick your wii if you update from Nintendo. Never update from Nintendo, don't MUCK up cios60-v54321. You have been warned.

This will installs a version patched SM 4.1, which its recommended. System Menu (SM)4.1 is currently the SM of choice, which is fully supported by priiloader. SM 3.2 and 4.2 are also acceptable System Menu, So to make things simple, just upgrade to 4.1, if you want to keep on your SM version, just skip this step..

Never Uninstall IOS or SM, you will brick your wii.!

• On MMM Select "WAD Manager" - Press A.
• Select the folder "System Menu 4.1" - Press A. Press B to go back a folder.
• Press (1) to "Install all Wads" - Press A. 3 wads should install without error..!
• Press any button to continue.

Be sure all 3 wads installed without error, very important.!!

All done! Now, you can install other wad applications through a MMM / wad manager, eg, USB Loader GX Channel, WiiWare Games collections, and many other interesting Wii homebrew apps.

Install A PATCHED IOS236.
If MMM won't load for you via bootmii cboot2, Install a patched ios236 with the methods below. Once you have ios236 installed, load MMM from the HBC and follow the wad installation instructions above.

Very IMPORTANT!
In the Homebrew channel, if you do not have a working internet connection already set up, you will see an icon flashing in the bottom right corner of the screen indicating its inability to initialize the network. You MUST wait for the icon to stop flashing OR let it flash for 30-60 seconds before proceeding, otherwise these apps will error shortly after being launched.

If you encounter this harmless error, power off the Wii and repeat this step from the beginning. To increase your chances of success, add a working internet connection to your Wii via the official Wii Settings Menu, but be sure to say "No" when asked to perform an update.

• Download IOS236-installer.rar and Extract to sd:/. Overwrite files if asked.
• Start the Homebrew Channel. This requires HBC 1.07 or higher.
• After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer v6".
• Read the startup messages then press (1).
• With the D-pad, choose "Load IOS from sd card". Do not choose "Download IOS from NUS".
• It should say "IOS236 installation is complete!" and,
• Press any button to exit when complete to return to the Homebrew Channel.

If you experience errors keep trying and it should eventually work, otherwise you can try using Simple IOS Patcher instead.

• After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer".
• Choose "IOS36" (already selected by default) and push A,
• Select "Install IOS to slot" and select 236,
• Select "Install patched IOS36" leaving the 4 patches set to "yes" and press A,
• Choose "Load IOS from SD card".
• Confirm your choice with the A button,
• When prompted, push A to continue the installation.
• When the installation is complete, you'll be back at the Main Menu,
• Then push B button to exit.

Resource: mauifrog - Wiihacks.com | Google Site CSG.
Share & enjoy the Homebrew!