This page contains the latest Windows drivers for the X360USB PRO - CK3i, Firmware Update Tools, and the latest X360 USB Pro Firmware Update v1.8,.. The driver supports Windows XP, Vista and Windows 7 on Both x86 and x64.
-- What is this? --
*Xecuter's X360USB PRO is the world's first SATA to USB Mass-Storage controller that not only enables WINAPI over USB, but also PORTIO. This powerful all-in-one converter can be used with any software and hardware that uses these signals to work.
|X360 USB Pro Adapter.|
No more struggling with specific SATA chipsets or issues with awkward operating system setups. Now tasks such as repairing your Xbox 360 DVD drives firmware or upgrading your broken DVD drive to a new one is more easier than ever before.
These two tools are needed for repairing or upgrading your Xbox 360 DVD drives firmware. Supports ALL versions of Hitachi, Samsung, Benq and Liteon both Phat and Slim drives.
*CK3 Probe III is Professional PMT based device tool for used with CK3i for targeted to installers who require a multi-use no cuts and no solder solution to the all the Phat Liteon DG-16D2S drives for easy DVD Key extraction in Jungle Flasher (or other preferred apps).
*SPUTNIK360 Such as the CK3 Probe, the SPUTNIK360 Unlock Probe is a simple device that disables the write protect on any Slim Liteon DG-16D4S drive that has the MXIC SPI flash device so you can easily repair or replace your faulty DVD drive with this model and have the ability to program your consoles DVD key. Works on all MXIC SPI's (9504, 0272, 0225 & 0401) and tested with firmware tools such as Jungle Flasher.
|Sputnik360 Probe Cut Point on DG-16D4S Boards.|
Just intro the drive and a popup will ask if you want to unlock the spi. Cut the trace - click yes - probe the point - unlocked done. Solder the trace back together - continue with the flashing as usual.
*X360USB PRO Firmware Update Tool v0.12. This is the latest version of the X360USB PRO Firmware Update Tool. Simply move the update switch to the left (Labeled ON) and connect to USB. The device will automatically set itself up in windows - no extra drivers are required.
When connecting your X360USB PRO make sure it says "EEPROM UPDATED" before continuing to update the firmware.
Simply load the latest firmware file and click update. Then move the switch back to its normal position (Labeled OFF) while it writes the firmware. The X360USB PRO bootloader switch should be in the OFF position at all times for normal operation.
*XECUTER X360USB PRO FIRMWARE v18.
You must use the X360USB PRO Update Tool Version: 0.12 or later to program this file. Do not use an earlier version.
- Liteon Turbo Mode added. If you thought it was fast before.....
- Slim Read / Write functions added.
- Optimized all Phat read / write functions.
- Improved Hitachi code.
- Embedded Phatkey code - much faster Liteon key extraction with Probe 3 / PMT.
- Various tweaks and other improvements.
Download: XP, Vista and Windows 7 - x86 and x64.*X360 USB Pro Driver v1.1.21.
**X360USB Pro Firmware Update Tool v0.12.
**Xecuter X360USB Pro Firmware v18.
Author: Team Xecuter, Jungle Flasher.
Share and Enjoy the homebrew's.!